diff --git a/src/content/docs/aws/customization/advanced/arm64-support.md b/src/content/docs/aws/customization/advanced/arm64-support.md index f07b7f765..4e1da9dd7 100644 --- a/src/content/docs/aws/customization/advanced/arm64-support.md +++ b/src/content/docs/aws/customization/advanced/arm64-support.md @@ -12,7 +12,7 @@ This manifest contains links to a Linux AMD64 as well as a Linux ARM64 image. ## Pulling the LocalStack image -With the multi-arch Docker manifest, your Docker client (and therefore the [LocalStack CLI](/aws/getting-started/installation/#localstack-cli)) now automatically selects the image according to your platform: +With the multi-arch Docker manifest, your Docker client (and therefore [`lstk`](/aws/getting-started/installation/#lstk)) now automatically selects the image according to your platform: ```bash docker pull localstack/localstack diff --git a/src/content/docs/aws/developer-tools/aws-replicator/index.mdx b/src/content/docs/aws/developer-tools/aws-replicator/index.mdx index 3880f8e7d..acc0d0911 100644 --- a/src/content/docs/aws/developer-tools/aws-replicator/index.mdx +++ b/src/content/docs/aws/developer-tools/aws-replicator/index.mdx @@ -26,7 +26,7 @@ A valid `LOCALSTACK_AUTH_TOKEN` must be configured to start the LocalStack for A :::note The Replicator is available from LocalStack CLI version 4.2.0. -If you encounter issues, update your [LocalStack CLI](/aws/getting-started/installation/#update-localstack-cli). +If you encounter issues, update your [LocalStack CLI](/aws/developer-tools/running-localstack/localstack-cli/#installation). ::: ### Retrieve credentials to access AWS @@ -86,7 +86,7 @@ Two options apply regardless of strategy: #### Using the LocalStack CLI The Replicator CLI is part of the LocalStack CLI. -Follow the [installation instructions](/aws/getting-started/installation/#install-localstack-cli) to set it up. +Follow the [installation instructions](/aws/developer-tools/running-localstack/localstack-cli/#installation) to set it up. Trigger a job with `localstack replicator start`, identifying the resource by its ARN: diff --git a/src/content/docs/aws/developer-tools/cloud-sandbox/ephemeral-instances.md b/src/content/docs/aws/developer-tools/cloud-sandbox/ephemeral-instances.md index 0dcfaf16e..ee991aa49 100644 --- a/src/content/docs/aws/developer-tools/cloud-sandbox/ephemeral-instances.md +++ b/src/content/docs/aws/developer-tools/cloud-sandbox/ephemeral-instances.md @@ -87,7 +87,7 @@ If you have created a Cloud Pod from an older version of LocalStack, you need to ## Ephemeral Instances CLI -The Ephemeral Instances CLI is included in the [LocalStack CLI installation](/aws/getting-started/installation/#install-localstack-cli), so no additional installations are needed to start using it. +The Ephemeral Instances CLI is included in the [LocalStack CLI](/aws/developer-tools/running-localstack/localstack-cli/#installation), so no additional installations are needed to start using it. If you're a licensed user, setting the `LOCALSTACK_AUTH_TOKEN` as an environment variable is recommended to access all features of the Ephemeral Instances CLI. Access the Ephemeral Instances CLI by running the `localstack ephemeral` command from your terminal. diff --git a/src/content/docs/aws/developer-tools/running-localstack/lstk.mdx b/src/content/docs/aws/developer-tools/running-localstack/lstk.mdx index 0f63745f4..a5e1fb880 100644 --- a/src/content/docs/aws/developer-tools/running-localstack/lstk.mdx +++ b/src/content/docs/aws/developer-tools/running-localstack/lstk.mdx @@ -23,7 +23,7 @@ Running `lstk` with no arguments takes you through the entire startup flow autom ## Prerequisites - [Docker](https://docs.docker.com/get-docker/) installed and running. -- A [LocalStack account](https://www.localstack.cloud/pricing) with a [license](/aws/getting-started/auth-token/#managing-your-license), and `lstk` handles authentication for you (see [Authentication](#authentication)). +- A [LocalStack account](https://www.localstack.cloud/pricing) with a [license](/aws/getting-started/auth-token/#license-assignment), and `lstk` handles authentication for you (see [Authentication](#authentication)). ## Installation diff --git a/src/content/docs/aws/developer-tools/security-testing/custom-tls-certificates.mdx b/src/content/docs/aws/developer-tools/security-testing/custom-tls-certificates.mdx index c6b460cf9..518129619 100644 --- a/src/content/docs/aws/developer-tools/security-testing/custom-tls-certificates.mdx +++ b/src/content/docs/aws/developer-tools/security-testing/custom-tls-certificates.mdx @@ -30,7 +30,7 @@ They all can be summarised as: ## Creating a custom docker image -If you run LocalStack in a docker container (which includes using [the CLI](/aws/getting-started/installation/#install-localstack-cli), [docker](/aws/getting-started/installation/#docker-compose), [docker-compose](/aws/getting-started/installation/#docker-compose), or [helm](/aws/customization/kubernetes/deploy-helm-chart)), to include a custom TLS root certificate a new docker image should be created. +If you run LocalStack in a docker container (which includes using [`lstk`](/aws/getting-started/installation/#lstk), [Docker Compose](/aws/getting-started/installation/#docker-compose), or [Helm](/aws/getting-started/installation/#helm-kubernetes)), to include a custom TLS root certificate a new docker image should be created. Create a `Dockerfile` containing the following commands: diff --git a/src/content/docs/aws/developer-tools/snapshots/cloud-pods.mdx b/src/content/docs/aws/developer-tools/snapshots/cloud-pods.mdx index d85aff37e..cf2a9c818 100644 --- a/src/content/docs/aws/developer-tools/snapshots/cloud-pods.mdx +++ b/src/content/docs/aws/developer-tools/snapshots/cloud-pods.mdx @@ -28,7 +28,7 @@ You can save and load the persistent state of Cloud Pods, you can use the [Cloud LocalStack provides a remote storage backend that can be used to store the state of your running application and share it with your team members. You can interact with the Cloud Pods over the storage backend via the LocalStack Web Application. -Cloud Pods CLI is included in the [LocalStack CLI installation](/aws/getting-started/installation/#install-localstack-cli), so there's no need for additional installations to begin using it. +Cloud Pods CLI is included in the [LocalStack CLI](/aws/developer-tools/running-localstack/localstack-cli/#installation), so there's no need for additional installations to begin using it. If you're a licensed user, we suggest setting the `LOCALSTACK_AUTH_TOKEN` as an environment variable. This enables you to access the complete range of LocalStack Cloud Pods features. @@ -451,7 +451,7 @@ localstack pod list s3-storage-aws :::note Full S3 remotes support is available in the CLI from version 3.2.0. -If you experience any difficulties, update your [LocalStack CLI](/aws/getting-started/installation/#update-localstack-cli). +If you experience any difficulties, update your [LocalStack CLI](/aws/developer-tools/running-localstack/localstack-cli/#installation). ::: ### ORAS remote storage diff --git a/src/content/docs/aws/getting-started/ai-workflows.mdx b/src/content/docs/aws/getting-started/ai-workflows.mdx index 091267b3c..ffc8c3212 100644 --- a/src/content/docs/aws/getting-started/ai-workflows.mdx +++ b/src/content/docs/aws/getting-started/ai-workflows.mdx @@ -21,7 +21,7 @@ This is useful when you want to: There are three common ways to use LocalStack in AI-assisted development: -- Use the [LocalStack MCP Server](/aws/tooling/mcp-server/) when your AI assistant supports MCP clients such as Cursor, Claude, Codex, or OpenCode. +- Use the [LocalStack MCP Server](/aws/developer-tools/running-localstack/mcp-server/) when your AI assistant supports MCP clients such as Cursor, Claude, Codex, or OpenCode. - Use [LocalStack Skills](https://github.com/localstack/skills) when you want reusable agent instructions for deploying and testing AWS architectures against LocalStack. - Use LocalStack with `tflocal`, `cdklocal`, or `awslocal` when you want the agent to generate infrastructure code or commands that you review and run locally. @@ -48,7 +48,7 @@ npx -y @localstack/localstack-mcp-server init ``` :::note -The MCP server runs locally and talks to a LocalStack instance. Your AI assistant is the MCP client. For full installation instructions, detailed setup, and the full tool reference, see the [LocalStack MCP Server guide](/aws/tooling/mcp-server/). +The MCP server runs locally and talks to a LocalStack instance. Your AI assistant is the MCP client. For full installation instructions, detailed setup, and the full tool reference, see the [LocalStack MCP Server guide](/aws/developer-tools/running-localstack/mcp-server/). You need a valid [Auth Token](/aws/getting-started/auth-token/) to configure the server. ::: @@ -103,6 +103,6 @@ Before applying changes to AWS, check that: ## Next steps -- Configure the [LocalStack MCP Server](/aws/tooling/mcp-server/) if your AI assistant supports MCP. +- Configure the [LocalStack MCP Server](/aws/developer-tools/running-localstack/mcp-server/) if your AI assistant supports MCP. - Review [LocalStack Skills](https://github.com/localstack/skills) for reusable agent workflows. - Browse the [LocalStack for AWS services](/aws/services/) reference, or check the [Getting Started FAQ](/aws/getting-started/faq/) for common setup questions. diff --git a/src/content/docs/aws/getting-started/ci-cd.mdx b/src/content/docs/aws/getting-started/ci-cd.mdx index b3dacb0ef..62728fb73 100644 --- a/src/content/docs/aws/getting-started/ci-cd.mdx +++ b/src/content/docs/aws/getting-started/ci-cd.mdx @@ -58,7 +58,7 @@ For brevity, these snippets show only the LocalStack startup shape. Apart from t LOCALSTACK_AUTH_TOKEN: ${{ secrets.LOCALSTACK_AUTH_TOKEN }} ``` - See the [GitHub Actions guide](/aws/integrations/continuous-integration/github-actions/) for the full setup. + See the [GitHub Actions guide](/aws/ci-pipelines/github-actions/) for the full setup. @@ -88,7 +88,7 @@ For brevity, these snippets show only the LocalStack startup shape. Apart from t localstack wait -t 60 ``` - See the [CircleCI guide](/aws/integrations/continuous-integration/circleci/) for the full setup. + See the [CircleCI guide](/aws/ci-pipelines/circleci/) for the full setup. @@ -116,7 +116,7 @@ For brevity, these snippets show only the LocalStack startup shape. Apart from t - localstack wait -t 60 ``` - See the [Bitbucket Pipelines guide](/aws/integrations/continuous-integration/bitbucket/) for the full setup. + See the [Bitbucket Pipelines guide](/aws/ci-pipelines/bitbucket/) for the full setup. @@ -133,7 +133,7 @@ For brevity, these snippets show only the LocalStack startup shape. Apart from t - localstack wait -t 30 ``` - See the [CodeBuild guide](/aws/integrations/continuous-integration/codebuild/) for the full setup. + See the [CodeBuild guide](/aws/ci-pipelines/codebuild/) for the full setup. @@ -162,7 +162,7 @@ For brevity, these snippets show only the LocalStack startup shape. Apart from t - awslocal s3 mb s3://test-bucket ``` - See the [GitLab CI guide](/aws/integrations/continuous-integration/gitlab-ci/) for the full setup. + See the [GitLab CI guide](/aws/ci-pipelines/gitlab-ci/) for the full setup. @@ -183,12 +183,12 @@ For brevity, these snippets show only the LocalStack startup shape. Apart from t - localstack wait -t 30 ``` - See the [Travis CI guide](/aws/integrations/continuous-integration/travis-ci/) for the full setup. + See the [Travis CI guide](/aws/ci-pipelines/travis-ci/) for the full setup. -You can also start from the [CI integrations overview](/aws/integrations/continuous-integration/) if you want a broader explanation of the CI workflow. +You can also start from the [CI integrations overview](/aws/ci-pipelines/) if you want a broader explanation of the CI workflow. ## Authentication in CI @@ -202,9 +202,9 @@ Most CI jobs should start with a clean LocalStack instance. A fresh instance mak If your pipeline needs state across jobs or workflow stages, use one of the state management options documented outside this getting started page: -- [Cloud Pods](/aws/capabilities/state-management/cloud-pods/) to save and restore named LocalStack state snapshots. -- [State export and import](/aws/capabilities/state-management/export-import-state/) to move state through artifacts or caches. -- [Persistence](/aws/capabilities/state-management/persistence/) when the same runner keeps a mounted LocalStack volume. +- [Cloud Pods](/aws/developer-tools/snapshots/cloud-pods/) to save and restore named LocalStack state snapshots. +- [State export and import](/aws/developer-tools/snapshots/export-import-state/) to move state through artifacts or caches. +- [Persistence](/aws/developer-tools/snapshots/persistence/) when the same runner keeps a mounted LocalStack volume. ## Next steps diff --git a/src/content/docs/aws/getting-started/installation.mdx b/src/content/docs/aws/getting-started/installation.mdx index 3aceb90be..40452723e 100644 --- a/src/content/docs/aws/getting-started/installation.mdx +++ b/src/content/docs/aws/getting-started/installation.mdx @@ -23,22 +23,17 @@ LocalStack for AWS features require an [Auth Token](/aws/getting-started/auth-to **Requirement:** You must have a working [Docker installation](https://docs.docker.com/get-docker/) before proceeding. - ### Install lstk - ```bash - brew install localstack/tap/lstk - ``` - - - ```bash - npm install -g @localstack/lstk - ``` + ```bash brew install localstack/tap/lstk ``` + ```bash npm install -g @localstack/lstk ``` - Download the binary for your platform from the [GitHub Releases](https://github.com/localstack/lstk/releases) and add it to your `PATH`. + Download the binary for your platform from the [GitHub + Releases](https://github.com/localstack/lstk/releases) and add it to your + `PATH`. @@ -138,78 +133,70 @@ Install the [official extension](https://hub.docker.com/extensions/localstack/lo ## Troubleshooting -#### The LocalStack CLI installation is successful, but I cannot execute `localstack` - -If you can successfully install LocalStack using `pip` but you cannot use it in your terminal, you most likely haven't set up your operating system's / terminal's `PATH` variable (in order to tell them where to find programs installed via `pip`). +Installation issues typically fall into one of three areas: getting your chosen install method working, activating your license, or reaching LocalStack over the network. This section will guide you to the appropriate guide that contains detailed fixes based on your installation method. -- If you are using Windows, you can enable the `PATH` configuration when installing Python, [as described in the official docs of Python](https://docs.python.org/3/using/windows.html#finding-the-python-executable). -- If you are using a MacOS or Linux operating system, please make sure that the `PATH` is correctly set up - either system wide, or in your terminal. +### lstk -As a workaround you can call the LocalStack CLI python module directly: - -```bash -python3 -m localstack.cli.main -``` +If you installed via [`lstk`](#lstk) and LocalStack fails to start, authenticate, or pull its image, see [lstk troubleshooting](/aws/developer-tools/running-localstack/lstk/#troubleshooting). -#### The `localstack` CLI does not start the LocalStack container +For first-run authentication (browser login, keyring tokens, or `LOCALSTACK_AUTH_TOKEN` in CI), refer to [Authentication](/aws/developer-tools/running-localstack/lstk/#authentication) and the [Auth Token guide](/aws/getting-started/auth-token/). -If you are using the `localstack` CLI to start LocalStack, but the container is not starting, please check the following: +### Docker Compose and Docker CLI -- Uncheck the **Use kernel networking for UDP** option in Docker Desktop (**Settings** → **Resources** → **Network**) or follow the steps in our [documentation](/aws/customization/networking/dns-server#system-dns-configuration) to disable it. -- Start LocalStack with a specific DNS address: +If you started LocalStack with [Docker Compose](#docker-compose) or the [Docker CLI](#docker-cli): -```bash -DNS_ADDRESS=0 localstack start -``` +- **License or credential errors**: see [Auth Token troubleshooting](/aws/getting-started/auth-token/#troubleshooting). +- **Container exits during startup, proxy/DNS/TLS issues, or port conflicts**: see [Startup Troubleshooting FAQs](/aws/getting-started/faq/#startup-troubleshooting-faqs). +- **DNS server or port conflicts**: see the [DNS Server guide](/aws/customization/networking/dns-server/). -- Remove port 53 as indicated in our [standard `docker-compose.yml` file](https://github.com/localstack/localstack/blob/main/docker-compose-pro.yml). +Ensure you have exported `LOCALSTACK_AUTH_TOKEN` in your shell before running `docker compose up` or `docker run`. -#### How should I access the LocalStack logs on my local machine? +### View logs -You can now avail logging output and error reporting using LocalStack logs. -To access the logs, run the following command: +Stream container logs using the command that matches your install method: + ```bash lstk logs ``` - - -AWS requests are now logged uniformly in the INFO log level (set by default or when `DEBUG=0`). -The format is: +For `lstk` CLI diagnostics (separate from container logs), see [Logging](/aws/developer-tools/running-localstack/lstk/#logging). + + + -```text -AWS . => () +```bash +docker compose logs -f localstack ``` -Requests to HTTP endpoints are logged in a similar way: + + -```text -2022-09-12T10:39:21.165 INFO --- [ asgi_gw_0] localstack.request.aws : AWS s3.ListBuckets => 200 -2022-09-12T10:39:41.315 INFO --- [ asgi_gw_0] localstack.request.aws : AWS s3.CreateBucket => 200 -2022-09-12T10:40:04.662 INFO --- [ asgi_gw_0] localstack.request.aws : AWS s3.PutObject => 200 -2022-09-12T11:01:55.799 INFO --- [ asgi_gw_0] localstack.request.http : GET / => 200 +```bash +docker logs -f localstack-main ``` -#### How should I share the LocalStack logs for troubleshooting? +Use the container name from your `docker run --name` flag if you set one. -You can share the LocalStack logs with us to help us identify issues. -To share the logs, call the diagnostic endpoint: + + ```bash -curl -s localhost:4566/_localstack/diagnose | gzip -cf > diagnose.json.gz +kubectl logs -f deployment/localstack ``` -Ensure that the diagnostic endpoint is run after you have tried reproducing the affected task. -After running the task, run the diagnostic endpoint and share the archive file with your team members or LocalStack Support. +The deployment name follows your Helm release name (default: `localstack`). + + + -#### My application cannot reach LocalStack over the network +To enable verbose startup logging, capture logs from a failed container, or share a diagnose bundle with support, see [How do I capture and share LocalStack container logs for troubleshooting?](/aws/getting-started/faq/#how-do-i-capture-and-share-localstack-container-logs-for-troubleshooting). -We have extensive network troubleshooting documentation available [here](/aws/customization/networking/). +### Network connectivity -If this does not solve your problem then please [reach out to LocalStack Support](/aws/help-support/get-help/). +If your application cannot reach LocalStack after installation, see the [networking documentation](/aws/customization/networking/). ## Next steps diff --git a/src/content/docs/aws/getting-started/local-development.mdx b/src/content/docs/aws/getting-started/local-development.mdx index 7b490037c..0d08cf937 100644 --- a/src/content/docs/aws/getting-started/local-development.mdx +++ b/src/content/docs/aws/getting-started/local-development.mdx @@ -271,7 +271,7 @@ Stop your LocalStack container to remove all emulated resources. LocalStack is e {/* prettier-ignore-end */} -To persist resource state, like S3 buckets or DynamoDB tables, across restarts, check out our [state management tools](/aws/capabilities/state-management/). +To persist resource state, like S3 buckets or DynamoDB tables, across restarts, check out our [state management tools](/aws/developer-tools/snapshots/). Remove the local files you created in this guide: diff --git a/src/content/docs/aws/services/elb.mdx b/src/content/docs/aws/services/elb.mdx index 6d12698fe..4bd763bed 100644 --- a/src/content/docs/aws/services/elb.mdx +++ b/src/content/docs/aws/services/elb.mdx @@ -177,7 +177,7 @@ In LocalStack, same-scheme listeners (for example, two HTTP listeners on ports 8 ### Configuring LocalStack for multiple listener ports -To reach two same-scheme listeners on distinct ports, both ports must be published in [`GATEWAY_LISTEN`](/aws/configuration/config/configuration/#core) when starting LocalStack: +To reach two same-scheme listeners on distinct ports, both ports must be published in [`GATEWAY_LISTEN`](/aws/customization/configuration-options/#core) when starting LocalStack: ```bash GATEWAY_LISTEN=0.0.0.0:4566,0.0.0.0:80,0.0.0.0:8080 localstack start diff --git a/src/content/docs/aws/tutorials/aws-proxy-localstack-extension.mdx b/src/content/docs/aws/tutorials/aws-proxy-localstack-extension.mdx index 43f312102..a41928ce7 100644 --- a/src/content/docs/aws/tutorials/aws-proxy-localstack-extension.mdx +++ b/src/content/docs/aws/tutorials/aws-proxy-localstack-extension.mdx @@ -29,7 +29,7 @@ In this tutorial, you will learn how to install the AWS Cloud Proxy extension an ## Prerequisites -- [LocalStack CLI](/aws/getting-started/installation#localstack-cli) with [`LOCALSTACK_AUTH_TOKEN`](/aws/getting-started/auth-token) +- [LocalStack CLI](/aws/developer-tools/running-localstack/localstack-cli/#installation) with [`LOCALSTACK_AUTH_TOKEN`](/aws/getting-started/auth-token) - [Docker](https://docs.docker.com/) - [AWS CLI](https://docs.aws.amazon.com/cli/v1/userguide/cli-chap-install.html) with [`awslocal` wrapper](https://github.com/localstack/awscli-local) - [LocalStack account](https://www.localstack.cloud/pricing) diff --git a/src/content/docs/aws/tutorials/cloud-pods-collaborative-debugging.mdx b/src/content/docs/aws/tutorials/cloud-pods-collaborative-debugging.mdx index dc95183cc..7f5ffeed4 100644 --- a/src/content/docs/aws/tutorials/cloud-pods-collaborative-debugging.mdx +++ b/src/content/docs/aws/tutorials/cloud-pods-collaborative-debugging.mdx @@ -31,7 +31,7 @@ The full sample application can be found [on GitHub](https://github.com/localsta ### **Prerequisites** -- [LocalStack CLI](/aws/getting-started/installation#localstack-cli) (preferably using `pip`) +- [LocalStack CLI](/aws/developer-tools/running-localstack/localstack-cli/#installation) - [Docker](https://docs.docker.com/engine/install/) - [Terraform](https://developer.hashicorp.com/terraform/tutorials/aws-get-started/install-cli) or [OpenTofu](https://opentofu.org/docs/intro/install/) and [terraform-local](/aws/connecting/infrastructure-as-code/terraform#install-the-tflocal-wrapper-script) - Optional for Lambda build & editing: [Maven 3.9.4](https://maven.apache.org/install.html) & [Java 21](https://www.java.com/en/download/help/download_options.html) diff --git a/src/content/docs/azure/getting-started/auth-token.mdx b/src/content/docs/azure/getting-started/auth-token.mdx index 4b5b7ec87..19745ba04 100644 --- a/src/content/docs/azure/getting-started/auth-token.mdx +++ b/src/content/docs/azure/getting-started/auth-token.mdx @@ -88,7 +88,7 @@ The following sections describe the various methods of providing your Auth Token `lstk` handles authentication for you — just run `lstk` or `lstk start` and it takes care of the rest. See the [lstk documentation](/aws/developer-tools/running-localstack/lstk/) for details on how it resolves your Auth Token. -On first run, `lstk` prompts you to pick an emulator and remembers your choice. If your `config.toml` already defaults to a different emulator, see [Already using lstk with a different default emulator?](/azure/getting-started/installation/#already-using-lstk-with-a-different-default-emulator) to target Azure instead. +On first run, `lstk` prompts you to pick an emulator and remembers your choice. If your `config.toml` already defaults to a different emulator, see [Already using lstk with a different default emulator?](/azure/getting-started/#already-using-lstk-with-a-different-default-emulator) to target Azure instead. For CI environments, see [CI Environments](#ci-environments) below. diff --git a/src/content/docs/azure/getting-started/quickstart.md b/src/content/docs/azure/getting-started/quickstart.md index 0e7a9cd6b..5b02d34f1 100644 --- a/src/content/docs/azure/getting-started/quickstart.md +++ b/src/content/docs/azure/getting-started/quickstart.md @@ -13,7 +13,7 @@ In this guide, you will run some basic Azure CLI commands to manage resource gro ## Prerequisites -- [`lstk`](/azure/getting-started/installation/#lstk) +- [`lstk`](/azure/getting-started/#lstk) - [Azure CLI (`az`)](https://learn.microsoft.com/en-us/cli/azure/install-azure-cli) - A LocalStack account with a license that covers Azure usage — `lstk` handles authentication for you (see [Authentication](/azure/getting-started/auth-token/)) diff --git a/src/content/docs/snowflake/getting-started/quickstart.md b/src/content/docs/snowflake/getting-started/quickstart.md index 4b2f76dcd..8893f6222 100644 --- a/src/content/docs/snowflake/getting-started/quickstart.md +++ b/src/content/docs/snowflake/getting-started/quickstart.md @@ -13,7 +13,7 @@ This guide explains how to set up the Snowflake emulator and use Snowflake CLI t ## Prerequisites - [LocalStack for Snowflake](/snowflake/getting-started/) -- [`localstack` CLI](/aws/getting-started/installation/#localstack-cli) +- [LocalStack CLI](/snowflake/getting-started/) - A [LocalStack Auth Token](/snowflake/getting-started/auth-token/) - [Snowflake CLI](/snowflake/integrations/snow-cli/)